Jergens Stainless Steel Ball Lock® Back Mount Receiver Bushings
Stainless Steel Ball Lock® Back Mount Receiver Bushings
Ball Lock® · Jergens Workholding Series
Jergens Stainless Steel Ball Lock® Back Mount Receiver Bushings are used in through hole applications (Light Press Fit).
Features & Specifications
- Material: 17-4 PH Stainless Steel
- Heat Treat: 40-45 RC
- Note(s):
- Installed bushings should be approximately 0.012" (0.3mm) below subplate surface.
- To alleviate the possibility of binding the shank in the bore, the maximum interference fit between bore and bushing O.D. should not exceed 0.0005" (0.013mm).
- Inch Ball-Lock Receiver Installation Instructions
- Metric Ball-Lock Receiver Installation Instructions
- Select a part number for CAD drawings, price and stock availability.
- Inch Metric
Specification Table
| Part Number | CAD | Unit | Shank Diameter (mm) | Outside Diameter +0.0000/-0.0004 A (in) | Depth +0.000/-0.002 B (in) | Counter Bore +/-0.006 C (In) | Minimum Subplate Thickness D (in) |
|---|---|---|---|---|---|---|---|
| 49511SS | Inch | 20 | 1.0950 | 0.345 | 1.280 | 7/8 | |
| 49512SS | Inch | 25 | 1.3763 | 0.416 | 1.593 | 1 | |
| 49516SS | Inch | 13 | 0.7870 | 0.277 | 1.000 | 3/4 | |
| 49517SS | Inch | 16 | 0.8760 | 0.285 | 1.155 | 3/5 |
Compiled from the Jergens product pages. For CAD drawings, full catalogs, lead time and quotation, contact ELINK — seventeen years of MRO expertise behind every recommendation.
Jergens OverviewBall Lock®Zero Point SystemQuick-Loc™Power WorkholdingPre-Engineered KitsOK-Vise®Tooling ColumnsVises & Top Tooling5-Axis Subplates & Risers
ELINK (Shanghai) Industrial & Trade Ltd. · Jergens Workholding Supply
Email: art@elinkmro.com
Tel: +86 21 5017 0881
Mobile/WeChat: +86 138 1777 5656
Add: Room 602, Bldg 11, 3855 Shangnan Rd, Pudong, Shanghai