NOGA Holding Systems
Precise Positioning for Dial & Test Indicators
Noga Holding System is used in many industrial applications, as well also in private life it is often required to fasten certain objects in a particular position. For the mechanical industries, Noga Holding System offers two different systems for holding dial indicators and lever-type test indicators in a required position: Noga Holding System offers the conventional two-arm system, in which a vertical column is connected to a horizontal arm by a swivel clamp, which allows tightening in any position.
Product Overview
The NOGA holding system is a universal support platform for dial indicators, lever-type test indicators and various measuring, lighting and inspection accessories. At its core is a central locking mechanism: one twist locks every joint at once, and releasing it lets you reposition freely - eliminating the classic indicator stand problem of one joint moving while you tighten another. Bases come as permanent magnets, on/off magnets, vacuum mounts and mechanical clamps, and combined with modular arms and fine-adjustment units they let you build a stable setup on machine tools, CMMs, granite plates and even camera rigs in seconds.
Key Features
- Central one-twist lock secures every joint at once
- FAT top fine adjustment or FAB bottom fine adjustment
- Articulated, PH post, centering and mini configurations
- Permanent magnet, on/off magnet, vacuum and clamp bases
- Modular arms combine freely for length and angle
- 360 degree fine adjustment for micron-level positioning
Technical Specifications
| Parameter | Value |
|---|---|
| Product Range | Articulated / PH / centering holders, bases, power arms, accessories |
| Fine Adjustment | FAT top, FAB bottom, double fine adjustment |
| Base Types | Permanent magnet, on/off magnet, vacuum, mechanical clamp |
| Interface Sizes | 8mm, 3/8in, 1/4in, M6 and camera thread |
| Typical Attachments | Dial gauges, test indicators, magnifiers, work lights |
Product Categories
- Articulated Holders FAT
11 models - Articulated Holders FAB
7 models - Articulated Holders FAT & FAB
4 models - Sets & Indicators
6 models - Centering Universal Holders
5 models - Mini Holders
8 models - Specialty Holders
10 models - PH Holders FAT
7 models - PH Holders FAB
5 models - Modular Holders
7 models - Bases
16 models - Accessories
33 models - Power Arms
3 models - Granite Base Stand
8 models - Heavy Duty V Block Magnet
1 models - Platinum Holders
9 models
Typical Models
| Model | Part no. | Application |
|---|---|---|
| MG Holder | MG61003 | Standard articulated holder, the most versatile |
| Large MG Holder | MG71003 | For large workpieces and long travel |
| NF Holder | NF61003 | NF series articulated holder |
| DG Holder | DG61003 | DG series articulated holder |
| MA Holder | MA61003 | MA series articulated holder |
| MG Holder with Double Fine Adjustment | MG6161 | Top and bottom fine adjustment |
| Heavy Duty Holder Set | MG6150 | Heavy duty holder supplied with indicator |
| PH Holder Standard | PH6400 | Rigid PH post configuration |
| PH Holder Large | PH6600 | Large PH post holder |
| Mini PH Holder | PH3100 | For tight spaces and small machines |
| Centering NF Holder Universal | NF1022 | Self centering, ideal for round parts |
| 360 Degree NF Holder 8mm | NF1021 | 360 degree fine adjustment mechanism |
| Permanent Round Magnet | HS1100 | Always on magnet, no switch needed |
| On/Off Magnet with Fine Adj. | NF3778 | Switchable magnet with fine adjustment |
| Power Arm 510mm | PA1500 | Long reach cantilever support |
| Granite Base Stand | MT2000 | High accuracy measuring platform base |
The table above lists representative models only. Contact us for the complete NOGA catalogue, technical drawings and selection support.
Ideal Applications
- Indicator set-up and tool setting on machine tools
- CMM and inspection bench measurement
- Round part and shaft alignment
- Measurement in tight spaces and on small parts
- Camera and inspection device support
- Work light and magnifier positioning
Need More Information?
ELINK MRO supplies NOGA deburring tools and holding systems from Israel and can support you with selection, application design and technical service. Contact us for product literature and a quotation.