RWP-024-3XR 3-Station In-Line Bridge Dovetail System
RWP-024-3XR Aluminum 0.75″ Dovetail 3-Station In-Line Bridge System
Product Description
Aluminum 0.75″ dovetail multi-station fixture — In-Line bridge system; a single base holds (3) RWP-024.
The RWP-024-3XR is a 0.75″ dovetail bridge system for milling applications. Designed for modular use: (3) RWP-024 fixtures are arranged in-line on a single base to hold longer parts.
Bridge systems are sold as complete sets as shown. *If you already own RWP-024 fixtures, the base unit can also be purchased separately — please call for details and availability.
Advantages of the Raptor Dovetail Fixturing System
Raptor dovetail fixtures are designed specifically for holding parts on 4-axis and 5-axis CNC machining centers. While providing rigid clamping, they expose five full sides of the workpiece — the vast majority of features can be machined in a single setup. Raptor's unique spring-loaded dovetail clamp grips the part with as little as 1/8″ (3.2 mm) of material — less material waste, simpler stock preparation, and zero clamping distortion. Every part only needs one standard dovetail pre-machined to work across the entire fixture range. Simple, strong, efficient. See the key dimensions diagram below.
Specifications
| Model | RWP-024-3XR |
| Product Type | 3 Station In-Line Bridge System (Bridge System) |
| Dovetail Size | 0.75″ |
| Body Material | Aluminum (7075) |
| Fixture Material | Aluminum (RWP-024) |
| Number of Stations | 3 |
| Machine Compatibility | 4-Axis / 5-Axis CNC Machining Center |
| Clamp Torque | 120–175 in-lbs (never exceed 175) |
Key Dimensions
Installation Instructions & Precautions
- The fixture must be securely bolted to the pallet or table using the supplied screws.
- Never modify or replace any screws, springs or clamps with non-original parts.
- Clamp tightening torque must be between 120–175 in-lbs, never exceed 175 in-lbs Most applications can be tightened directly with the supplied T-handle wrench, but a torque wrench is always recommended until the correct torque for your application is determined. Depending on workpiece size and material being cut, clamping force may need to be adjusted. Never over-tighten or under-tighten — either can cause clamp or fixture failure.
- When machining parts in dovetail workholding, strictly follow our pre-machining diagram; failure to do so may result in part release and/or fixture damage. Pay particular attention to the dimensions and corner radii specified in the diagram.
- Failure to follow these instructions may result in personal injury, or damage to the workpiece, cutting tools, fixture and/or machine tool.
What's Included
- 3 × Raptor RWP-024 Dovetail Fixture
- 1 × Raptor RWP-220-3X Bridge
- 2 × Shoulder Bolt (Shoulder Bolts)
Patented Design:Patent No. US8,672,310 B2
US List Price:$1,943.20 (for reference only, please contact Shanghai Yilian for a formal quotation)